Wheeler
![]()
FEATURES:
-Precision machined unit
-Designed in install, un-install, or adjust front & rear dovetail sights
-Fully captures & supports slide so it won't deform
-Works on all semi auto pistols
-Large 4 post drive knob to easily push the sight
-Reference marks for precise adjustments
FEATURES:
-Includes 3 wood bushings, one 1" & one 3/4" predrilled block & one solid block for custom drilling
Other Features: Barrel vise holds fast to clamp your barrel for removal or insatllation, barrel vise includes two pre-drilled oak blocks 1" and 3/4" plus a solid block for custom drilling
FEATURES:
-Compatible w/ ferrous metals, alloys, stainless steel & synthetics
-Not for use on wood, plastics or scopes
-4 oz. can contains enough Cerama-Coat to finish two long guns or several handguns
-Scratch resistant and weatherproof
-Black
Other Features: Highly resistant to scratching chipping and gun solvents, non-reflective matte finish, weatherproof any gun's finish, clean, spray, bake process
Features:
-Mounts any scope 1" or 30mm
Complete List of Components:
-F.A.T. Wrench® torque screwdriver
-10 gunsmithing screwdriver bits
-Level-Level-Level
-1" scope ring lapping bar
-30mm scope ring lapping bar
-1" scope ring alignment bars
-30mm scope ring alignment bars
-Lapping bar handle
-Lapping compound
-Thread lock
Other Features: Includes: instructional dvd f.A.T.Wrench torque screwdrvr 10 gunsmithing screwdrvr bits 1" & 30mm ring lapping bars 1" & 30mm alignment bars lapping bar handle lapping compound thread lock level-level-level includes plastic storage case
Features:
-Torque adjustments range from 10 inch pounds to 65 inch pounds
-Accuracy +/- 2 inch pounds
-1/4" drive
-Plastic case included
Bits included:
Leupold/Buehler windage bit
#10 flat blade bit
#11 flat blade bit
#32 flat blade bit
3/32" Allen bit
7/64" Allen bit
5/32" Allen bit
T15 Torx bit
T20 Torx bit
Square drive adapter bit
FEATURES
-Bits are made from S2 tool steel & hardened to 56-58 Rockwell "C"
-54 Hollow-ground flat bits (Size .120"x.020" to .360"x.070")
-Includes doubles in the thinnest sizes
-Complete selection of Phillips, Allen & Torx bits to cover scope rings, bases, recoil pads, etc.
-15 Specialty bits
-Two handles made from overmolded plastic
-Regular size & a slimmer, shorter "close quarters" handle
-Comes in a durable box
Other Features: Case included, 54 hollow ground flat bits, 15 specialty bits, 8 allen bits, 4 phillips bits, 3 torx bits, 15 specialty bits,
Other Features: 58 piece set, chrome plated steel bits, ind bit markings, storage case, 5 3/4 flexible extension shaft,
FEATURES
-Makes initial scope adjustment simple, fast & precise
-Compatible with a wide variety of guns
-High power daylight visible red laser
-Molded plastic storage case included
-Runs on a single Lithium 123A battery (included)
FEATURES
-Fits Picatinny rails
-Attaches to any Picatinny rail
-Folds in when not in use
-Precision machined aluminum with anodized finish
-Tunable with the precision leveling set screw
-Indicates precise, repeatable level gun position
-Increases accuracy by ensuring proper gun alignment
Other Features: Folding anti-cant indicator
FEATURES
-Makes initial scope adjustment simple, fast & precise
-Compatible with a wide variety of guns
-High power daylight visible green laser
-Molded plastic storage case included
-Runs on a single Lithium 123A battery (included)
FEATURES
-Contains 26 bits
-Includes standard, Phillips, hex, & torx bits
-Also includesa 2" long #2 Phillips bit & a hex-to-square conversoin bit
-Magnetic, hollowhandle allows you to carry a variety of bits
FEATURES
-Ideally suited for M1911-style pistols
-Features a variety of notches, grooves & holes on both sides
-1 5/16" high, 4" in diameter
-Non-marring urethane for long use
Other Features: Variety of notches, grooves, & holes on both sides ideally suited for m1911-style pistols
FEATURES
-Precision extruded from aircraft grade aluminum
-Bonded with non-marring urethane
-The urethane provides a protective layer for the barrel's finish while providing extraordinary gripping abilities
-Three different barrel openings: .85", .66", .53"
-Will accommodate anything from an AR pencil barrel up to a bull barrel
FEATURES:
-Ergonomic over-molded design
-0-12 lbs. range
-+/- 2% accuracy
-Load sensor directly contacts the trigger
-Feature max, min, average, & live functions
-Audible indicator tone
-Low battery indicator
-Soft touch buttons
-Arm folds inside housing to protect the load sensor when not in use
-Foam lined storage case
Other Features: Accurately measures trigger pull weight, 0-12lbs range, +/-.1oz accuracy
FEATURES:
-Savage Barrel Nut Wrench
-Fits late model Savage 10 & 110 series rifles
-Features two 1/2" square drive holes for swing bar or torque wrench. Made from 3/16" steel
-1 Notched Barrel Nut Wrench
-1 Brass Shim
-1 Smooth Barrel Nut Wrench
Other Features: Double-ended savage barrel nut wrench fits early and late model nuts on the 110 and 10 series rifles, barrel vise not included
FEATURES
-Start bolt catch roll pin easily with starter punch
-Finish installation flush with the finishing punch
-Flat on one side for proper alignment
FEATURES:
-Makes installing or changing trigger guards quick & easy
-Comes with an install pin & an un-install pin
-Pins conveniently store in the frame
-Precisely control & install the trigger guard roll pin to prevent damage to the receiver
-The old method of hammering the roll pin into the receiver can easily damage our serialized lower
-Durable construction -made of aluminum with a Mil-Spec anodized finish
Other Features: Makes installing or changing trigger guards quick and easy
FEATURES:
-Perfect for many different gunsmithing jobs
-Comes with a wide grade of files from a rough rasp all the way down to a super extra fine diamond plate
-Whether you're reshaping a wood stock or smoothing out an action, this set is perfect for you
-Includes Nylon storage pouch, 16 files, 1 file cleaning brush, 1 stick of file chalk
-18 piece set
Other Features: Includes nylon storage pouch, 16 files, 1 file cleaning brush, 1 stick of file chalk
FEATURES:
-Ergonomic over-molded design
-Large LCD digital display for ease of viewing
-15-100 in/lb. range
-+/- 2% accuracy
-Audible indicator tone
-Visual indicator
-Low battery indicator
-Soft touch buttons
-Injection molded storage case
FEATURES
-Fits 1" scope tubes
-Attaches to scope
-Folds in when not in use
-Precision machined aluminum with anodized finish
-Indicates precise, repeatable level gun position
-Increases accuracy by ensuring proper gun alignment
Other Features: Folding anti-cant indicator fits 1" tube diameter scopes
FEATURES
-Fits30mm scope tubes
-Attaches to scope
-Folds in when not in use
-Precision machined aluminum with anodized finish
-Indicates precise, repeatable level gun position
-Increases accuracy by ensuring proper gun alignment
Other Features: Folding anti-cant indicator fits 30mm tube diameter scopes
FEATURES:
-Made from high-grade steel
-A custom-molded box houses the contents of the set
-2 ergonomic driver handles for delivering maximum torque
-54 hollow ground bits specifically designed to match the thin slots in gun screws, sizes ranging from
approx. .120 x .020 to .360 x .070
-8 Allen bits
-4 Phillips bits
-3 Torx bits
-Note: the bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit
shouldn't be considered a defect, rather it means that the fastener will require some other means of
removal or an application of a suitable compound that will penetrate threads, such as Kano Kroil
Other Features: Case included, 54 flat bits, 8 allen bits, 4 phillips bits, 3 torx bits and more
FEATURES:
-Heavily constructed of carbon steel
-Features a 1" Thick, 15" long steel handle
-Wrench clamps around the exterior of the action & fully supports receiver ring to prevent twisting & damage
during barrel removal
-Wrench works w/ both large & small ring Mauser receivers, & with most flat bottom rifle receivers
Other Features: 15" x 1" handle, barrel vise not included fits mausers with flat bottom receivers
FEATURES:
-Replacement barrel shims for use w/ Wheeler Barrel Vise
-Includes 1" & 3/4" predrilled blocks & a solid block for custom drilling
-Oak
Other Features: Barrel vise holds fast to clamp your barrel for removal or insatllation,
FEATURES:
-Combines a two sided hammer w/ brass & polymer faces, eight precision brass punches, four steel
punches & two plastic punches
-Great for shooting range or on your workbench
-Includes plastic carrying case
Other Features: 1 brass/polymer combo hammer, 8 brass punches, 4 steel punches, 2 plastic punches,
FEATURES:
-Bolt Catch Install Tool Kit
-AR Trigger Guard Install Tool
-3 Starter Punches & 3 Driver Punches
-Two Sided Hammer
-6 Steel punches in sizes: 1/16, 5/16 & 3/32"
-3 w/ counter-bored tips to start roll pins
-3 with indexing tips to finish roll pins
Other Features: Bolt catch install punch kit, trigger guard install tool, 3 starter punches, 3 driver punches, two sided hammer comes in storage case, kit is designed for the ar-15
FEATURES:
-Made from high-grade steel
-A custom-molded box houses the contents of the set
-1 ergonomic driver handles for delivering maximum torque
-21 hollow ground bits specifically designed to match the thin slots in gun screws, sizes ranging from
approx. .120 x .020 to .360 x .070
-10 Allen bits
-4 Phillips bits
-5 Torx bits
-Note: the bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit
shouldn't be considered a defect, rather it means that the fastener will require some other means of
removal or an application of a suitable compound that will penetrate threads, such as Kano Kroil
Other Features: Case included, 20 flat bits, 10 hex bits, 5 torx bits and more.
FEATURES
-Great addition to the 72 or 89piece Screwdriver Sets
-Hollow ground flat bits
-Durable S2 tool steel
-Features plastic storage tray
-½” x ¼” socket driver
-2.5mm, 3mm, 3.5mm, 4mm, 4.5mm,4.5mm 5mm, 5.5mm, 6mm, 7mm,and 8mm Hex Bits
-T6, T7, T8, T9, T10, T15, T20,T27, T30 Torx Bit
Other Features: Great addition to the 72 & 89 piece screwdriver sets, includes metric hex bits, torx bits, and a storage tray
- 1