RCBS

Rcbs fl die set.270wsm gp-a

FEATURES
-Caliber: .270 Winchester Super Short Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs neck sizer die set set.243 winchester

FEATURES:
-For bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle &
neck-sized to go back into the same rifle
-The set consists of a Neck Sizer Die w/ an Expander-Decapping Unit, & a Seater Die w/ Bullet Seater Plug
-The Neck Sizer Die resizes the neck only & de-primes
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-.243 Remington

Rcbs fl die set 7x57mm mauser gp-a

FEATURES
-Caliber: 7X57MM Mauser
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs neck sizer die set.223 remington

FEATURES:
-For bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle &
neck-sized to go back into the same rifle
-The set consists of a Neck Sizer Die w/ an Expander-Decapping Unit, & a Seater Die w/ Bullet Seater Plug
-The Neck Sizer Die resizes the neck only & de-primes
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-.223 Remington

Rcbs standard roll crimp die set.44-40 winchester gp-b

FEATURES
-Caliber: .44-40 Winchester
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Rcbs small base die set.243 winchester

FEATURES:
-For bottleneck cases used in tight-chambering semi-automatic, pump or lever-action rifles.
-The set consists of a Small Base Sizer Die w/ an Expander-Decapping Unit and REgular Seater Die w/ Seater Plug
-The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths
-It also de-primes the case
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-To seat bullets w/out crimping, simply unscrew the die until the crimp ring no longer engages the case
mouth
-.243 Remington

Rcbs lock ring assembly 1-1/2" for.50bmg
Other Features: This locking ring is designed specifically ffor 1.5-12 inch dies used for reloading.50bmg ,.416 barrett, and.460 steyr

Rcbs standard taper crimp die set.50ae/.50sw gp-b

FEATURES
-Caliber: .50AE/.50 Smith & Wesson
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & taper crimps

Rcbs accessory handle -2

FEATURES
-Large ergonomic design
-Can be used with many RCBS accessories

Other Features: More ergonomically designed handle for use with a wide array of rcbs accessories

Rcbs shell holder #12

FEATURES
-Shell Holder #12
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs rotary case trimmer pilot.22 caliber

FEATURES
-.22 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs 3 die set w/roll crimp.444 marlin gp-c

FEATURES
-Caliber: .444 Marlin
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Rcbs small base sizer die only.308 winchester

FEATURES
- Caliber: .308 Winchester
- The Small Base Sizer Die is for bottleneck type cases used in tight-chambering semi-automatic,
pump or lever-action firearms.
- The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths.
- It also de-primes the case.
- Note: Not recommended for ammunition used in bolt-action rifles

Rcbs rotary case trimmer pilot.35 caliber

FEATURES
-.35 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs accessory base plate-3
Other Features: Save time space and eliminate a loading bench top full of holes.Pre=tapped letter coded holes to quickly mount or dismount rcbs tools

Rcbs partner press w/o dies

FEATURES
-Easy to use & incredibly durable
-Perfect for a second press for different options or a portable press for use at the range
-Featuresa compound leverage system
-Durable steel links
-Priming arm eliminates the need for a separate priming tool
**Dies and shellholder sold separately

Rcbs ultrasonic case cleaner 3 liter capacity heated

FEATURES
-Rapidly removes tarnish, carbon buildup & metal oxides from brass cases
-60W transducer
-100W ceramic heater
-36kHz ultrasonic frequency
-A sensor indicates when to change out solution
-Select from five preset temperature settings & set the timer from 1 to 30 minutes
-3.2-quart stainless steel tank
-Plastic basket
-Convenient drain valve & tube

Other Features: Has plastic basket, heater, drain and drain tube, user friendly keypad and display

Rcbs shell holder #23

FEATURES
-Shell Holder #23
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs collet for bullet puller.20 caliber

FEATURES
-Caliber: .20 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Rcbs shell holder #4

FEATURES
-Shell Holder #4
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs fl die set.30-30 win.Gp-a

FEATURES
-Caliber: .30-30 Winchester
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs shell holder #37

Rcbs trim-mate primer pocket uniformer small

FEATURES
-Manufactured with carbide cutters
-Serve to true the primer pocket wall & bottom

Rcbs chamber case length gauge 6mm creedmoor
Other Features: Designed to quickly check case length, diameter, and overall cartridge length of your handloaded ammo.

Rcbs shell holder #1

FEATURES
-Shell Holder #1
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs fl die set.338 lapua magnum gp-a

FEATURES
-Caliber: .338 Lapua Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs primer pocket swager combo-2

FEATURES
-Redesigned to fit a larger group of cases
-Swaging rods are made from stronger, high-tensile steel
-Not for use on progressive presses

Other Features: Works with most 7/8-14 threads reloading presses

Rcbs rebel single stage press master reloading kit
Other Features: Kit contains: rebel press, uniflow-iii powder measure, 1500 grain digital scale, hand priming tool, power pull bullet puller kit speer #15 manual, fold up hex key set, primer pocket brushes , deburring tool, case loading block, case spray lube, 2 case neck brushes, powder funnel.

Rcbs stuck case remover

FEATURES
-Extracts stuck cases from standard sizer dies without damaging the die
-Uses a very simple two-step removal process

Rcbs shell holder #36

Rcbs trim-mate primer pocket uniformer large pistol

FEATURES:
-Manufactured w/ carbide cutters, & serve to true the primer pocket wall & bottom