Pearce Grips Inc.
![]()
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 1/2" of additional length
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
-They form the next logical finger positioning feature to provide control & comfort without sacrificing concealablility
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 1/2" of additional length
-An optional filler piece is provided for Glock models with a semi-circular cut-out in the lower front
area of the grip body (which allows for installation of the PG-19 on all Mid & Full Size Glocks
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
Other Features: Not for use on non-full metal lined magazines
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 1/2" of additional length
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Fits Taurus Slim PT709 & PT740
FEATURES
-Grip Frame Insert for Glock Mid & Full Size Models
-Fits M17, 18, 19, 20, 21, 22, 23, 24, 31, 32, 34, 35, 37, & 38
-Will not fit any SF (Short Frame) nor any Generation 4 frames
-This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention
-Helps keep debris out of the magazine well
Other Features: Fits glock 17,18,19,20,21,22 23,24,25,31,32,34,35,37,38
FEATURES:
-Replaces the magazine base plate & retain all other factory components
-Does not alter the capacity
-Will only work on magazines equipped w/ double notches for the ambi magazine release
-Fits Gen 5 models 17, 19 & 34
Other Features: This magazine base plate will fill the semi-circular cutout in the glock gen5 m17, 19, and 34, the plate increases comfort and control
Other Features: Adds 5/8" additional length, fits gen5 glock 26-27, does not add capacity to mags
FEATURES
-Grip Frame Insert for Glock Sub Compact Size Models
-Fits models 26, 27, 33, & 39
-Only fits the new Generation 4 frames
-Uses a friction fit for retention
-Allows for use of factory interchangeable backstraps
-Helps keep debris out of the magazine well
Other Features: Fits sub-compact models 26, 27, 33, 39
FEATURES
-Adds capacity to Generation 4 Sub-Compact, Mid, & Full Size Glock high capacity magazines
-Replaces original floor plate & internal locking plate & adds two rounds to a 9mm,
two rounds to a 40SW & 357SIG, and one rounds to a 45GAP magazine
Other Features: Fits generation 4 guns fits full size, mid-size, and sub-compact models adds 1 round to 9mm/40/357 adds 1 round to 45gap
FEATURES
-2 extensions per package
-Grip extension for Ruger LCP
-Replaces the magazine base plate
-Retains all other factory components
-Does not alter the capacity of the magazine
-Adds approximately 1/2" additional length
*Will NOT fit any other .380 firearms
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 3/4" of additional length
-Slightly longer than the one provided by the factory and incorporates the factory texture pattern
as well as an ergonomic curve for better grip
Other Features: Adds 3/4" additional length, fits glock 43
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
FEATURES
-Replace the magazine base plate & internal floor plate
-Adds two rounds to the Glock M26, one rounds to the Glock M27 & M33 & no rounds to the Glock M39
-Will add 5/8" additional length
-Fourth Generation Magazines only
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
-Forms the next logical finger positioning feature to provide control & comfort
Other Features: Fits generation 4 26/27/33, adds 2 rounds to 9mm, adds 1 round to 40s&w/.357sig
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 1/4" of gripping surface
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
-They provide comfort without increasing the length of the grip over stock dimensions
Other Features: Fills the semi-circle at the lower area of the grip body for full metal lined magazines will not fit non-full metal lined magazines
FEATURES:
-Helps keep debris out of the back cavity
-Provides a clean finished look to the heel of the frame
Other Features: Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame
FEATURES
-Grip Frame Insert for Glock 42 & 43
-Uses a friction fit for retention
-Helps keep debris out of the magazine well
FEATURES
-Replaces the magazine floor plate adding two rounds capacity to Glock factory
M20, M21, M29, M40 & M41 magazines
-Used on high capacity magazines only, it will not work on the 10-round M20 & M21 magazines
-Not for use on Glock M30 10-round magazines
-Works on 3rd & 4th Generations
-Works on Glock M30 9-round magazines, enabling the magazine to hold 11 rounds
-Made from High Impact Polymer & withstand temperatures from -20F to 350F
Other Features: For use on high cap mags only adds 2 rounds to capacity, this product will work on 9 round glock 30 magazines, not for use on model 30 10-round magazines
FEATURES:
-Replaces the magazine base plate on the Springfield XDS/XDE/XDS MOD2 in 45ACP, 40 S&W & 9mm
single stack mags
-Adds one round capacity to the magazine & increases the grip length by approx. 7/8"
Other Features: Fits xd in 9mm,.40sw/.45, mod 2, will not fit xdm models adds one round,
FEATURES
-Grip extension for Kahr 9/40 Compacts
-Replaces the original base plate & internal locking plate
-Does not alter the capacity of the magazine
-Adds approximately 5/8" additional length
Other Features: Adds 3/4" additional length, fits s&w m&p shield plus 9mm & 40 s&w, does not add to mag capacity
FEATURES
-Grip extension for S&W M&P Shield 9mm & .40 cal.
-Replaces the original base plate
-Does not alter the capacity of the magazine
-Adds approximately 3/4" additional length
*Will NOT work on S&W M&P Shield .45 ACP
Other Features: Adds 3/4" additional length, fits s&w m&p shield 9mm & 40sw
FEATURES
-M&P Shield 45 grip extension
-Replaces the magazine base plate on the M&P Shield 45
-Does not alter the capacity
-adds approximately 3/4" additional gripping surface
-Will only work on .45ACP
-Will not work on S & W Shield 9mm or .40 cal
Other Features: Adds 3/4" additional length, fits s&w m&p shield.45acp
FEATURES:
-Replaces the magazine base plate on the single stack 380 SHIELD EZ
-This extension does not alter the capacity of the magazine
-Adds approximately 1/2" additional gripping surface w/ enhanced ergonomics
Other Features: Replaces the magazine floor plate adding 1" in grip length to the factory magazine , adds 2 rounds to 9mm and 1 round to.40
FEATURES
-Rubber Wrap-Around Grips for Beretta Bobcat & Tomcat
-Provide a positive hold for the shooter
-Designed to fit either the Model 3032 Tomcat (1999 or earlier frames only) or the Model 21A Bobcat
-Not for use on Tomcat models equipped with an extended safety lever
Other Features: Fits models 21a and 3032 not for use with ext.Safety
FEATURES:
-Replaces the magazine base plate on the GLOCK Gen 4 & 5
-Does not alter the capacity of the magazine
-Adds approximately 1/2" additional gripping surface as well as enhanced ergonomics
-The enhanced griping surface also incorporates a texture which closely matches the frame of the firearm
Other Features: This grip extension gives the user an additional 1/2" as well as included piece that can be installed to fill the semi-circular cut out in gen5
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Fits Taurus TCP
FEATURES
-Grip extension for Springfield XD 9mm, .357 Sig, & .45 Gap (sub-compact, compact & full size)
-Replaces the original base plate
-Does not alter the capacity of the magazine
-Adds approximately 5/8" additional length
*Will NOT fit .45 ACP models, or XDM frames
Other Features: Fits xd in 9mm,.40sw/.357 sig and.45 gap will not fit xdm models will not fit.45acp models
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 5/8" of additional gripping surface
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
FEATURES
-Replace the magazine base plate & internal locking plate.
-Will add 1" in length & two rounds of additional capacity
-Fits XD45
Other Features: Adds 1" in length adds 2 extra rounds fits xd in.45acp only not compatible with xdm frames
FEATURES
-Grip extension for Springfield XDM 9mm & .40 S&W
-Replaces the original base plate
-For use on XDM models with a rounded internal locking feature
*Will NOT work on XDM models with a slotted (square) internal locking feature
*Will NOT fit standard XD frames
Other Features: Adds grip length fits xdm full size & compact will not fit xd series for use on xdm models with a rounded internal locking feature.Will not work on models with a slotted (square) internal locking feature.
Other Features: Replaces the magazine floor plate adding 1.5" in grip length to the factory magazine,
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
-They form the next logical finger positioning feature to provide control & comfort without sacrificing concealablility