Odin Works
FEATURES:
-Includes cross pin and set screws
-Nitride finish
-Made from carbon steel
-Internal Diameter 0.7505-0.751
-Fits inside all ODIN Works Forends
FEATURES:
-Designed to give you better control through a more ergonomic grip angle while not adding bulk to the front
of your rifle or pistol
-Low profile ergonomic fit
-M-LOK B1 Handstop
-Red
FEATURES:
-New mounting solution for Harris Style Bipods
-Used w/ the KeyMod interlocking rail system
-Made from 6061 Aluminum
-Low Profile
-Universal KeyMod System
-Black Matte Anodize
-Designed to maintain repeated grip position
-Includes KeyMod nuts, screws, & hex wrench
-Red
Other Features: Allows harris bipods to mount to keymod rails
FEATURES:
-Free floating
-Features a one piece barrel nut w/ no shims or clocking needed.
-All mounting hardware included
-Length: 12.5"
-Weight: 9.28oz
FEATURES
-Red anodized finish
-Works with both AR10 & AR15 uppers
-Quick release pins
-Machined out of 6061 billet aluminum
-Allows you to secure your upper while you clean or install barrels, forends, muzzle devices,
& any accessories you want to mount on your upper
Other Features: Quick release hard anodized pins, used to secure the upper for cleaning or gunsmithing
FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate
FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate
FEATURES:
-Free float
-Aluminum
-Engineered w/ advanced ergonomics for comfort & improved performance
-Continuous/uninterrupted Picatinny Rail across the top
-Accessory rails can be placed at 3, 6, & 9 o'clock positions
-QD sling mount positions at 3 & 9 o'clock
-Length: 15.5"
-Weight: 7oz.
Other Features: Includes one 5 slot accy rail weight: 7 oz.
FEATURES:
-Made from 6061 Aluminum
-Largest profile yet, making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
FEATURES
-Low profile
-Made from 6061 aluminum
-Black matte anodized
-Universal KeyMod system
-Designed to maintain repeated grip position
-Compatible with Harris style bipods
-Includes KeyMod nuts, screws & hex wrench
-Length: 2.6"
-Weight: 0.75 oz. (including screws)
Other Features: Allows harris bipods to mount to keymod rails
FEATURES:
-For AR15 NO forward assist - slick side
-Low profile brass deflector
-9mm
Other Features: Slick side (no forward assist) w/low profile brass deflector, machined from 7075 billet aluminum,
FEATURES
-Caliber: 6.5 Grendel
-Profile: light
-Length: 16"
-Gas placement: intermediate
-Low profile gas block
-Rifling: button 1:8" twist
-Made from 416R stainless steel
-Hand-lapped
-M4 feed ramps
-5/8-24 threading
-SAAMI spec chamber
-1" MOA guaranteed
-.750 gas block included
-Bolt carrier group included- type 2 6/5 Grendel bolt face
-Intermediate gas tube included
Other Features: Intermediate length gas placement (between mid-length and rifle length), light profile, 6.5 grendel bolt carrier, includes tunable low profile gas block
FEATURES:
-For 9mm AR builds
-1/2-28 threading
-Core & cap are machined from 416R stainless steel & black nitrided while the sleeve is made from
titanium.
-Timing & tuning is done w/ the titanium sleeve, no shims or crush washers needed
-Length:2.5"
-Weight: 3.9 oz
Other Features: Titanium sleeve, isonited 416r stainless steel, 2.56" long, 3.9 oz, 1" diameter for 9mm ar builds, 1/2-28 threading
FEATURES
-For 7.62(.30 cal.)
-5/8-24 threading
-Length: 3.06"
-Weight: 4.39 oz.
-Diameter: 1"
-Titanium sleeve
-Core & cap are machined from 416R stainless steel
-3-piece modular design makes installation simple & fast
-No shims or crush washers needed
Other Features: Titanium sleeve, isonited 416r stainless steel, 3.06" long, 4.35 oz, 1" diameter for 7.62 (30) caliber, 5/8-24 threading
FEATURES
-For 5.56 (.22 cal.)
-1/2-28 threading
-Length: 2.56"
-Weight: 4.1 oz.
-Diameter: 1"
-Titanium sleeve
-Core & cap are machined from 416R stainless steel
-3-piece modular design makes installation simple & fast
-No shims or crush washers needed
Other Features: Titanium sleeve, isonited 416r stainless steel, 2.56" long, 4.1 oz, 1" diameter for 5.56 (22 cal), 1/2-28 threading
FEATURES:
-Made from 6061 Aluminum
-Largest profile yet, making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
Other Features: Billet aluminum, works with magpul bad lever and kns pins
FEATURES:
-Compatible w/ BAD Lever & KNS Pins
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
-Black
Other Features: Billet aluminum, works with magpul bad lever and kns pins
FEATURES:
-Red
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
Other Features: Made from 7075 billet aluminum
FEATURES:
-1/2" drive 1 3/16" jumbo crowfoot wrench for your ODIN Works Ragna Forend installation
-Use this crowfoot wrench to torque the barrel nut to 40-50 ft lbs.
Other Features: For odin ragna barrel nuts and any barrel nut that uses a 1-3/16" wrench
FEATURES
-Length: Carbine
-For AR-15
-Stainless
FEATURES
-Length: mid-length
-For AR-15
-Stainless
FEATURES
-Length: Pistol
-For AR-15
-Stainless
FEATURES
-15.5" M-LOK Forend
-Free float
-Made from 6005-T651 aluminum
-Inside Diameter: 1.6"
-Outside Diameter: 1.8"W x 2.1"H
-Engineered with advanced ergonomics for comfort & improved performance
-Continuous/uninterrupted Picatinny rail across the top
-Accessory rails can be placed at 3, 6, & 9 o'clock positions & can be joined to create
continuous Pic Spec Rail
-QD sling mount positions at 3 & 9 o'clock
-Engineered to allow for low profile gas block to fit inside
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Works with both metal & polymer accessories
*All M-LOK forends include an M-LOK accessory rail (with KeyMod nuts), forend adapter, barrel nut,
Vibra-Tite, & 6 6-32 screws
Other Features: Includes one 5 slot accy rail
FEATURES
-Caliber: 6.5 Grendel
-Profile: DMR
-Length: 18"
-Gas placement: intermediate
-Low profile gas block
-Rifling: button 1:8" twist
-Weight: 2.43 lbs.
-Made from 416R stainless steel
-Hand-lapped
-M4 feed ramps
-5/8-24 threading
-SAAMI spec chamber
-1" MOA guaranteed
-.750 gas block included
-Bolt carrier group included- type 2 6/5 Grendel bolt face
-Intermediate gas tube included
Other Features: Intermediate length gas placement (between mid-length and rifle length), dmr profile (heavy barrel), 6.5 grendel bolt carrier, includes tunable low profile gas block
FEATURES
-Caliber: .223 Remington
-Profile: medium
-Length: 16.1"
-Gas placement: mid length
-Low profile gas block
-Rifling: button 1:8" twist
-Weight: 1 lb. 15 oz.
-Made from 416R stainless steel
-Hand-lapped
-M4 feed ramps
-1/2-28 threading
-1" MOA guaranteed
Other Features: Mid-length gas placement, includes tunable low profile gas block
FEATURES:
-Black
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
Other Features: Made from 7075 billet aluminum
FEATURES:
-Compatible w/ BAD Lever & KNS Pins
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
-Red
Other Features: Billet aluminum, works with magpul bad lever and kns pins
FEATURES:
Length: 9"
M-LOK to Arca
Lightweight design
6061-T6 aluminum
Black Hard Anodized
FEATURES
-Low profile
-Made from 6061 aluminum
-Black matte anodized
-Designed to maintain repeated grip position
-Compatible with Harris style bipods
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Works with both metal & polymer accessories
-Includes M-LOK nuts, screws & hex wrench
-Length: 2.6"
-Weight: 0.75 oz. (including screws)
Other Features: Allows harris bipods to mount to m-lok rails
FEATURES:
-Allows you to rapidly change mags w/out disrupting your shooting pattern
-Ambidextrous
-Easy to reach
-Ergonomic design
-Contoured for positive depression & reduced slip
FEATURES:
-Free floating
-All mounting hardware included & picatinny sight rail
-Length: 12.4"
-Weight: 5.45oz
FEATURES
-Caliber: 6.5 Grendel
-Profile: DMR
-Length: 20"
-Gas placement: rifle
-Low profile gas block
-Rifling: button 1:8" twist
-Weight: 2.66 lbs.
-Made from 416R stainless steel
-Hand-lapped
-M4 feed ramps
-5/8-24 threading
-SAAMI spec chamber
-1" MOA guaranteed
-.750 gas block included
-Bolt carrier group included- type 2 6/5 Grendel bolt face
Other Features: Rifle length gas placement, dmr profile (heavy barrel), 6.5 grendel bolt carrier, includes tunable low profile gas block