Midwest Industries
FEATURES
-For 5.56mm/.223 Rem rifles with 1/2-28 threads
-Reduces felt recoil & muzzle flash
-Constructed of tool steel with a phosphate finish
-Includes new crush washer
Other Features: For 5.56/223 rifles with 1/2-28 thread, reduces recoil and muzzle flash, includes crush washer, made in usa
FEATURES:
-Will fit AR series handguards with large or small holes
-Hard coat anodized 6061 aluminum construction
-In most circumstances you will be able to use standard heat shields after installation
-Mounting hardware included
-Approx. 4" long
*Will not fit Gen2 SS handguards
Other Features: Easy install no gunsmithing, will fit standard ar-15 handguards with small or large holes.Mounts to to or bottom of handguard only.Cheap alternative for a lightweight accy rail made in usa
FEATURES
-For 4-position or 6-position CAR/M4 stocks
-Works well in all type of configurations, including single point, two point or three point tactical slings
-Easy, no gunsmith installation, no need for special tools or removal of buffer tube
-Constructed of 6061 aluminum & hardcoat anodized
-Heavy duty QD swivel with limited travel
Other Features: Easy to install clamps on, ambidextrous for left or right hand use, quick detach swivel, made in usa
FEATURES:
-Heavy duty design for extreme use
-Billet machined from 4140 alloy steel
-No bushings to come loose or spin
-Anti-rotation QD socket
FEATURES:
-The smoothest functioning QD lever on the market
-Superior clamping that will not damage or coin the rail surface
-Extremely smooth in operation w/ a multi-facetted adjustment nut to get the exact tension required
-Fully adjustable w/ no tools required, can be adjusted to fit rails not machined to mil-spec tolerances
-Weight: 2.1 oz
FEATURES
-No gunsmith install
-Installs in minutes using nothing but the wrenches that come in the kit
-High quality T-marked Mil-Spec 1913 rails for lights, lasers & optics
-Lightweight, rugged construction, 6061 aluminum, hardcoat anodized
Other Features: Easy install no gunsmithing, four mil-std 1913 rails, rugged but light weight 10 oz, made in the usa
FEATURES
-Linear comp design diverts muzzle blast forward
-Constructed of tool steel with a phosphate finish
-1/2-28 threads for 5.56/.223 pistols or rifles
-Includes new crush washer
-4.1 oz. weight
-1.75" length
-100% Made in the USA
Other Features: For 5.56/223 pistol/rifle w/ 1/2-28 thread, diverts muzzle blast forward, includes crush washer, made in usa de
FEATURES
-7 slot
-6061 aluminum, hard coat anodized
-M-LOK mounting hardware included
FEATURES:
-4140 heat treated barrel nut
-Barrel nut & wrench included
-Features patented 4140 heat treated torque plate
-1913 picatinny top rail
-Two integral anti-rotation QD sling sockets
-14" length
-Weight: 11.4 oz
Other Features: 1 piece free float handguard, one m-lok rail section incl.
FEATURES
-12", Rifle Length
-No gunsmith drop-in installation, installs like factory plastic handguards
-Gen2 design with four anti-rotation QD sockets for push button swivels
-Incredibly lightweight, extremely solid lock-up with monolithic type continuous top rail
-High quality 1913 Mil-Spec rails, T-marked for location
-Constructed from 6061 aluminum, hard coat anodized
-Compatible with most gas piston systems
Other Features: Easy install no gunsmithing, four mil-std 1913 rails, two piece drop in design, made in usa
FEATURES
-No gunsmith install
-Installs in minutes using nothing but the wrenches that come in the kit
-High quality T-marked Mil-Spec 1913 rails for lights, lasers & optics
-Lightweight, rugged construction, 6061 aluminum, hardcoat anodized
-Lifetime Warranty
Other Features: Easy install no gunsmithing, made in usa fits yugo m92 krinkov pistol and zastava m92 pap pistol
FEATURES:
-This stock wrench will also accept a 1/2" torque wrench so you can get the nut properly torqued.
-Very well made & durable
Other Features: Fits ar-15 castle nut on rear stock.Made in usa
FEATURES:
-For push button QD sling swivels
-Anti-rotation prevents swivel from spinning
-Attachment hardware included
-Hard coat anodized aluminum
Other Features: Fits m-lok rails, made in the usa
FEATURES:
6061 aluminum, hard coat anodized
M-LOK(TM) mounting hardware included
Made in USA
Other Features: 1 piece free float handguard, one m-lok rail section incl.
Other Features: Dpms high compatible, for receivers with.210" tang height
FEATURES:
-For Remington 700 Short Action
-Fits right or left hand action
-Mil-Spec 1913 rail for solid mounting
-Easy install, one-piece construction
-Includes mounting hardware
Other Features: Accepts m-1913 picatinny rings made in usa
FEATURES:
Inside diameter 1.3"
Outside diameter 1.5"
Overall length: 10.5"
6061 Aluminum Type 3 Hard Coat Anodized
Continuous MIL-STD 1913 Picatinny Top rail
Two Integral Anti-Rotation QD Sling Sockets
Barrel nut and barrel nut wrench included
Weight: 9.0 oz
Made in USA
FEATURES:
Inside diameter 1.3"
Outside diameter 1.5"
Overall length: 12.625"
6061 Aluminum Type 3 Hard Coat Anodized
Continuous MIL-STD 1913 Picatinny Top rail
Two Integral Anti-Rotation QD Sling Sockets
Barrel nut and barrel nut wrench included
Weight: 9.9 oz
Made in USA
FEATURES:
Inside diameter 1.3"
Outside diameter 1.5"
Overall length: 14"
6061 Aluminum Type 3 Hard Coat Anodized
Continuous MIL-STD 1913 Picatinny Top rail
Two Integral Anti-Rotation QD Sling Sockets
Barrel nut and barrel nut wrench included
Weight:10.8 oz
Made in USA
Other Features: Designed for small red dots with a picatinny base pivot design allows the gun to be folded for compact storage.Includes mounting hardware, made in usa.Fits gen2 sub2k only not gen1
FEATURES:
-4140 heat treated barrel nut
-Barrel nut & wrench included
-Features patented 4140 heat treated torque plate
-1913 picatinny top & side rail
-Two integral anti-rotation QD sling sockets
-7.25" length
-Weight: 9.5 oz
Other Features: 1 piece free float handguard
Other Features: Dpms high compatible, for receivers with.210" tang height
Other Features: Fits marlin 1895, henry.30-30 and.45-70 lever rifles
FEATURES:
Inside diameter 1.75"
Outside diameter 2.0"
1.95" over mounting flats
High quality MIL-STD 1913 top rail
One five slot Magpul M-LOK polymer rail section included
Construction from 6061 aluminum, hard coat anodized
Barrel nut and barrel nut wrench included
Weight: 16 oz
Made in USA
Other Features: Suppressor compatible
FEATURES:
Inside diameter 1.75"
Outside diameter 2.0"
1.95" over mounting flats
High quality MIL-STD 1913 top rail
One five slot Magpul M-LOK polymer rail section included
Construction from 6061 aluminum, hard coat anodized
Barrel nut and barrel nut wrench included
Weight: 10.2 oz
Made in USA
Other Features: Suppressor compatible
Other Features: For use with firearms that have a picatinny attachment, not for use with firearms with buffer assemblies, all nfa rules apply
FEATURES
-Made for 1 1/4" slings
-Recessed button prevents accidental release
-All steel construction
-Push button operation
-Mag phosphate finish
Other Features: With flush button, heavy duty construction with flush qd button, made in usa
FEATURES
-Allows the mounting of Aimpoint T1, T2, H1, H2, or clones that use the same mounting design
-This will NOT fit the Bushnell red dot
-Patent pending pivot design allows the gun to be folded as designed for compact storage
-Constructed from 6061 aluminum
-Hard coat anodized for a lifetime of service
-Includes all mounting hardware
-2.7 oz. weight
-100% Made in the USA
Other Features: Allows the mounting of aimpoint t1, t2, h1, h2 and most clones that use the same mounting design.Will not fit bushnell red dot pivot design allows the gun to be folded for compact storage.Includes mounting hardware, made in usa.Fits gen2 sub2k only not gen1