Magpul
![]()
FEATURES
-Four-piece
-Served as a lightweight, low-profile rail mounted indexpoint for improved weapon control, or as a forward
stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle
-Kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, & one XTM Enhanced Half
Panel
Other Features: Fits 1913 picatinny rails, four piece kit, rail mounted index point or used as a forward stop
FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards
Other Features: Fits 1913 picatinny rails
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such asBushmaster, DPMS, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.55" ExtendedRubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec size extension on your rifle, make sure to order #MAG400
Other Features: Fits commercial buffer tubes
FEATURES
-Lightweight, low-profile M-LOK slot index point for improved weapon control
-Forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle
-Aggressive TSP Texture for enhanced weapon control
-Kit includes one M-LOK Hand Stop, one M-LOK Index Panel, & one M-LOK Rail Cover Type 2
-Also includes an M-LOK Hand Stop MOE Adapter for use with Magpul polymer M-LOK Hand Guards or
Forends, as well as other wider profile rails
Other Features: Fits m-lok rails
FEATURES:
-For use with M-LOK compatible hand guards & forends
-Accepts clip-style sling attachments such as our own Paraclip
-Durable steel construction
-Case hardened & finished with Melonite™ for extreme resistance to wear & corrosion
Other Features: Fits a wide range of clips
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348
Other Features: Fits mil-spec buffer tubes
FEATURES
-Compatible with Mossberg 590/590A1*12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included
*Note: Not compatible with the optional Mossberg heatshield. Removal is required before use.
FEATURES:
-Accepts any push-button QD sling swivel as well as the Magpul QDM
-Durable steel construction
-Case hardened & finished with Melonite™ for extreme resistance to wear & corrosion
-Works with both mil-spec & commercial-spec carbine receiver extensions (buffer tubes)
Note: The ASAPQDis NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, & MOE® Rifle Stocks.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Low-profile
-Two-piece
-Attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories
-Aggressive anti-slip texture
-Dual-side routing clips for retention of light/laser cables
-Each set comes with four (4) two-piece panels, which will cover ONE side of a carbine rail
Other Features: Fits picatinny rails, package of four
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 4" recommended)
-All mounting hardware included
-Height, over rail: 1.75"
-Width, maximum: 1.77"
Other Features: Fits 1913 picatinny rails
FEATURES
-Fits 5.56x45 PMAG 30 & 40 round AR/M4 GEN M2 MOE® and AR/M4 GEN M3™ magazines*
-Impact resistant polymer construction provides light weight & resists operational abuse
-Wide-set, two-piece bolt-on design resists flexing
-Integral grooves interface with PMAG ribbing to eliminate slippage
*Note: This MagLink is NOT compatible with first generation PMAGs (with Black follower, circa 2007-2009), 10 or 20 round PMAGs, custom branded PMAGs, or any other non AR15/M4 specific Magpul magazine such as the EMAG®, PMAG 30G, or PMAG 30 AUS. Will also not fit other larger caliber magazines such as 7.62x39 & 7.62x51 PMAGS or any metal magazine.
Other Features: Fits magpul pmag gen m2 moe and gen m3
FEATURES
-11 slots, max overall length of 4.9"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included
Other Features: Fits all m-lok handguards
FEATURES
-3 pack
-For 5.56 NATO
-Provides improved speed & controllability during high stress, tactical magazine changes
-Durable synthetic rubber loop with recessed rough gripping surface
-Quick & easy installation & removal
Other Features: Fits most ar-15 magazines
FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Remignton 870 12 ga. shotgun
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-More vertical grip angle than standard A2 grips
-Unique backstrap design for proper trigger finger placement
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
Other Features: Aggressive texture for positive weapon control, rubber overmolding, optimized for short lop rifles
FEATURES
-Replacement for AR15/AR10 pistol-grip*
-Removable and replaceable front and rear straps for a custom fit over multiple hand sizes
-Improved ergonomics and positive anti-slip texture on both sides and rear back-strap
-Removable inner core holds a reusable 1/2 fl. oz. lubrication bottle (oil not included)
-Custom waterproof storage of batteries (AA/AAA or CR123A) or spare bolt/firing pin (AR15/M4) is
available with optional Storage Cores
-Each kit includes three backstrap sizes (S,M,L), two frontstraps (A1 and A2 style), lubrication bottle core,
and dual-drive mounting screw
*Note: This TYPE 1 Kit fits all AR15/M4's as well as many 7.62x51 variants such as the Aero Precision M5 308, CMMG MK3, CORE Rifle Systems CORE30, HK 417/MR762A1, LWRCI REPR, Mega Arms MATEN, POF P-308, Ruger SR-762, and SIG716.
In general, the TYPE 1 Kit will fit most all 7.62x51 AR lower receivers but there may or may not be a gap between the backstrap's 'beavertail' and the receiver. This gap is purely aesthetic and will not affect function.
FEATURES
-Compatible with Mossberg 590/590A1*12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included
*Note: Not compatible with the optional Mossberg heatshield. Removal is required before use.
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Compact rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-1.25” Footman’s Loop for sling mounting, & also accepts the M-LOK QD Sling Mount for push-button
sling attachment (sold separately)
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-K will only fit the common mil-spec tube.
Other Features: Fits mil-spec buffer tubes, compact buttstock
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Compact rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-1.25” Footman’s Loop for sling mounting, & also accepts the M-LOK QD Sling Mount for push-button
sling attachment (sold separately)
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-K will only fit the common mil-spec tube.
Other Features: Fits mil-spec buffer tubes, compact buttstock
FEATURES
-7 slots, max overall length of 3.3"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Machined from mil-spec anodized aluminum
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included
Other Features: Fits all m-lok handguards
FEATURES
-5 round
-Compatible with short action AICS (Accuracy International Chassis Systems) pattern bottom metal &
cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm
Creedmoor, .260 Remington, .243 Winchester, & others*
-Accepts a cartridge overall length of up to 2.86"
-5-round capacity, but the follower leg can be easily clipped to increase the capacity by one extra cartridge
-Next-generation impact & crush resistant polymer construction
-Self-lubricating follower for increased reliability
-Long life stainless steel spring
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & is easy to disassemble for maintenance
*Note: Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington,
.300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety & potential
combinations of aftermarket receivers, stocks, chassis, & bottom metal that accept AICS pattern mags,
minor fitting may be required. Not compatible with Accuracy International AE rifles.
Other Features: Compatible with aics spec metal bottoms and the magpul bolt action magazine well for the remington hunter 700 magpul stocks
FEATURES:
-Clip-style sling attachment point for 1 1/4" webbing
-Combine with the MS1™ Sling for a dedicated two-point sling, or with MS1 MS3 Adapter or MS1 MS3-QD
Adapter for a two to one-point convertible sling
-Lightweight, yet durable construction with hardened steel & heavy-duty polymer
-Provides weapon quick-release capabilities in an emergency
-Cross-Bolt Lock Bar allows the user to optionally lock the lever closed for extra security
-Steel Paraclip lever is case hardened & finished with Melonite for extreme resistance to wear & corrosion
Other Features: Compatible with asap plate, rsa, msa, m-lok paraclip sling mount and other clip-in sling attachement points
FEATURES
-Heavy-duty push-button QD sling swivel for one-point attachment
-Durable, precision-cast steel QD D-ring allows for quick transition from one to two-point mode & is finished
with Melonite for extreme resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear/Front - Compatible with buttstocks, end plates, receivers, & hand guards that have a QD socket as
well as the Magpul ASAP®-QD, RSA®-QD, MSA™-QD, & shotgun Forward Sling Mounts.
Other Features: Fast transition between one-point and two-point.With dual qd sling swivels
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Sloping cheek weld provides a wide contact surface for user comfort
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
-Rear/Bottom - 1.25" sling loops
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG471
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits mil-spec buffer tubes
FEATURES
-All steel construction
-Case hardened & finished with Melonite QPQ™ for extreme resistance to wear & corrosion
-Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
-Elevation adjustment knob – no tools required
-Positive detents in both the up & down positions as well as on the elevation knob
-Standard AR sight height when deployed
Elevation Adjustment:
1 MOA (1.131"/100m) per click with a 14.5" sight radius
0.7 MOA (0.820"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES:
-Size 38*
-Chocolate
-Top grade bullhide leather exterior layer
-Supportive but flexible reinforced polymer interior
-Gun belt rigidity with dress belt comfort offers stretch & sag-free performance
-Removable chrome plated buckle with branded "tool-free" fasteners
-Standard 1-1/2" wide & 1/4" thick to fit most belt loops & holsters
-Eight holes with 3/4" spacing for a wide yet precise adjustment range
*Your pant size is not your belt size. See Sizing Guide under Specs at
https://www.magpul.com/products/tejas
Other Features: Made in texas, el original
FEATURES
-Caliber: 9mm
-10-round capacity
-Polymer construction
FEATURES
-5 slots, max overall length of 2.5"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Machined from mil-spec anodized aluminum
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included
Other Features: Fits all m-lok handguards
FEATURES
-For 5.56x45 NATO (.223 Remington)
-True 10-round capacity that does not require limiters, pins, rivets, etc.
-Next-generation impact & crush resistant polymer construction
-Wide compatibility with non Colt-spec platforms
-Anti-tilt follower & constant-curve internal geometryfor increased reliability
-Long life stainless steel spring
-Over-travel insertion stop on the spine
-Flared floorplate aids magazine handling & disassembly
-Pop-off Impact/Dust Cover to minimize debris intrusion & for ammunition protection in storage & transit