Lancer

Lancer handguard sig mpx 8" m-lok carbon fiber

FEATURES:
-Approximately 50% weight reduction vs OEM aluminum handguard
-1.6" ID allows for over-suppressor use
-M-LOK attachment system for greater compatibility w/ aftermarket accessories
-Same ease of installation as OEM handguard
-Extended versions clear most suppressors for improved ergonomics
-Weight: .18 lbs
-Length: 8"

Lancer shotgun extension tube mossberg 590/930 plus5

FEATURES
-Adds 5 rounds to capacity
-Length: 12.6"
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel

Other Features: Extra long spring included that needs cut to length, plus 5 rounds, length 12.6"

Lancer magazine l5awm ar-15.300blk 10rd translucent smoke

FEATURES:
-Caliber: .300 Blackout
-10 round capacity
-Translucent Smoke
-Impact resistant polymer
-Stainless steel spring

Other Features: All.300 blackout magazines feature fde floorplates for safety

Lancer magazine coupler cinch l5awm l5 l5a usgi ar15 mags

FEATURES
-For the L5, L5A & L5AWM Translucent Magazines
-Designed to match the unique contours of the polymer body & align with the molded ribs,
ensuring the magazines are aligned & held securely without obscuring the view of the rounds
-The Lancer magazine Cinch can also be used with USGI Aluminum & Steel Magazines

Lancer shotgun extension tube rem.870/1100/versamax plus3

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-3X adds three rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 3 rounds, length 8.8" some rem.Shotguns require minor modification of the shotguns magazine tube, two indents/tabs must be removed for proper operation

Lancer shotgun extension tube benelli m1/m2/sbe/sbe2 plus3

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-3X adds three rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 3 rounds, length 9.4"

Lancer shotgun extension tube rem.870/1100/versamax plus2

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-2X adds two rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 2 rounds, length 7.8" some rem.Shotguns require minor modification of the shotguns magazine tube, two indents/tabs must be removed for proper operation

Lancer nitrous compensator.308/7.62 5/8x24 tpi black

FEATURES
-.308 cal.
-Made of black nitrided steel
-Threaded for a5/8-24 muzzle device
-"Tunable" compensator designed for competitive shooters
-Includes different size jets to customize the downward force, minimizing muzzle climb
-Angled blast baffles are incorporated to reduce recoil & further stabilize the rifle
-Includes a crush water & tuning jets

Lancer nitrous compensator 223/5.56 1/2x28 tpi nato black

FEATURES
-.223/5.56mm
-Made of black nitrided steel
-Threaded for a 1/2-28 muzzle device
-"Tunable" compensator designed for competitive shooters
-Includes different size jets to customize the downward force, minimizing muzzle climb
-Angled blast baffles are incorporated to reduce recoil & further stabilize the rifle
-Includes a crush water & tuning jets

Lancer shotgun extension tube rem.870/1100/versamax plus5

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-5X adds five rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 5 rounds, length 14.1" some rem.Shotguns require minor modification of the shotguns magazine tube, two indents/tabs must be removed for proper operation

Lancer magazine l5awm ar-15.300blk 10rd opaque black

FEATURES:
-Caliber: .300 Blackout
-10 round capacity
-Opaque Black
-Impact resistant polymer
-Stainless steel spring

Other Features: All.300 blackout magazines feature fde floorplates for safety

Lancer magazine l7awm sr-25 7.62x51 5rd translucent fde

FEATURES
-Translucent Dark Earth
-5 round capacity
-Lightweight, strong polymer body
-Durable steel feedlips
-Switchable drain lock in floor plate allows users to configure the magazine for either
water-borne or extreme dust conditions

Designed to work in:
-SR25
-DPMS 308
-Sig 716
-LMT
-LM308
-POF P308
-S&W M&P10

Other Features: Made in usa, fits sr25, sig716, dpms 308, lm308, translucent-see through hardened steel feed lips with a polymer body

Lancer magazine l7awm sr-25 7.62x51 10rd translucent fde

FEATURES
-Translucent Dark Earth
-10 round capacity
-Lightweight, strong polymer body
-Durable steel feedlips
-Switchable drain lock in floor plate allows users to configure the magazine for either
water-borne or extreme dust conditions

Designed to work in:
-SR25
-DPMS 308
-Sig 716
-LMT
-LM308
-POF P308
-S&W M&P10

Other Features: Made in usa, fits sr25, sig716, dpms 308, lm308, translucent-see through hardened steel feed lips with a polymer body

Lancer magazine l7awm sr-25 7.62x51 10rd translucent smoke

FEATURES
-Translucent Smoke
-10 round capacity
-Lightweight, strong polymer body
-Durable steel feedlips
-Switchable drain lock in floor plate allows users to configure the magazine for either
water-borne or extreme dust conditions

Designed to work in:
-SR25
-DPMS 308
-Sig 716
-LMT
-LM308
-POF P308
-S&W M&P10

Other Features: Made in usa, fits sr25, sig716, dpms 308, lm308, translucent-see through hardened steel feed lips with a polymer body

Lancer magazine l7awm sr-25 7.62x51 10rd opaque fde

FEATURES
-Opaque Dark Earth
-10 round capacity
-Lightweight, strong polymer body
-Durable steel feedlips
-Switchable drain lock in floor plate allows users to configure the magazine for either
water-borne or extreme dust conditions

Designed to work in:
-SR25
-DPMS 308
-Sig 716
-LMT
-LM308
-POF P308
-S&W M&P10

Other Features: Made in usa, fits sr25, sig716, dpms 308, lm308, opaque-cannot see through hardened steel feed lips with a polymer body

Lancer magazine l7awm sr-25 7.62x51 10rd translucent clear

FEATURES
-Translucent Clear
-10 round capacity
-Lightweight, strong polymer body
-Durable steel feedlips
-Switchable drain lock in floor plate allows users to configure the magazine for either
water-borne or extreme dust conditions

Designed to work in:
-SR25
-DPMS 308
-Sig 716
-LMT
-LM308
-POF P308
-S&W M&P10

Other Features: Made in usa, fits sr25, sig716, dpms 308, lm308, translucent-see through hardened steel feed lips with a polymer body

Lancer magazine l7awm sr-25 7.62x51 10rd opaque black

FEATURES
-Opaque Black
-10 round capacity
-Lightweight, strong polymer body
-Durable steel feedlips
-Switchable drain lock in floor plate allows users to configure the magazine for either
water-borne or extreme dust conditions

Designed to work in:
-SR25
-DPMS 308
-Sig 716
-LMT
-LM308
-POF P308
-S&W M&P10

Other Features: Made in usa, fits sr25, sig716, dpms 308, lm308, opaque-cannot see through hardened steel feed lips with a polymer body

Lancer shotgun extension tube mossberg 590/930 plus3

FEATURES
-Adds 3 rounds to capacity
-Length: 9.2"
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel

Other Features: Extra long spring included that needs cut to length, plus 3 rounds, length 9.2"

Lancer shotgun extension tube benelli m1/m2/sbe/sbe2 plus6

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-6X adds six rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 6 rounds, length 14.7"

Lancer shotgun extension tube mossberg 590/930 plus6

FEATURES
-Adds 6 rounds to capacity
-Length: 14.5"
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel

Other Features: Extra long spring included that needs cut to length, plus 6 rounds, length 14.5"

Lancer shotgun extension tube rem.870/1100/versamax plus6

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-6X adds six rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 6 rounds, length 16.4" some rem.Shotguns require minor modification of the shotguns magazine tube, two indents/tabs must be removed for proper operation

Lancer shotgun extension tube mossberg 590/930 plus7

FEATURES
-Adds 7 rounds to capacity
-Length: 17.7"
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel

Other Features: Extra long spring included that needs cut to length, plus 7 rounds, length 17.7"

Lancer magazine l7awm sr-25 7.62x51 5rd translucent clear

FEATURES
-Translucent Clear
-5 round capacity
-Lightweight, strong polymer body
-Durable steel feedlips
-Switchable drain lock in floor plate allows users to configure the magazine for either
water-borne or extreme dust conditions

Designed to work in:
-SR25
-DPMS 308
-Sig 716
-LMT
-LM308
-POF P308
-S&W M&P10

Other Features: Made in usa, fits sr25, sig716, dpms 308, lm308, translucent-see through hardened steel feed lips with a polymer body

Lancer shotgun extension tube mossberg 590/930 plus8

FEATURES
-Adds 8 rounds to capacity
-Length: 18.3"
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel

Other Features: Extra long spring included that needs cut to length, plus 8 rounds, length 18.3"

Lancer shotgun extension tube rem.870/1100/versamax plus8

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-8X adds eight rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 8 rounds, length 20.4" some rem.Shotguns require minor modification of the shotguns magazine tube, two indents/tabs must be removed for proper operation

Lancer shotgun extension clamp picatinny rail one side

FEATURES
-Shotgun Extension Clamp for use with the LSX Shotgun Extension Tube
-The two aluminum clamping halves have high temperature silicone foam pads to ensure a
slip free connection with the carbon-fiber tube and shotgun barrel
-The clamping halves are held together with steel cap head screws
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-Also recommended for Remington applications due to the shallow threading on the
Remington magazine tubes
-Rail on one side

Lancer shotgun extension clamp picatinny rail both sides

FEATURES
-Shotgun Extension Clamp for use with the LSX Shotgun Extension Tube
-The two aluminum clamping halves have high temperature silicone foam pads to ensure a
slip free connection with the carbon-fiber tube and shotgun barrel
-The clamping halves are held together with steel cap head screws
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-Also recommended for Remington applications due to the shallow threading on the
Remington magazine tubes
-Rail on both sides

Lancer shotgun extension clamp no rail

FEATURES
-Shotgun Extension Clamp for use with the LSX Shotgun Extension Tube
-The two aluminum clamping halves have high temperature silicone foam pads to ensure a
slip free connection with the carbon-fiber tube and shotgun barrel
-The clamping halves are held together with steel cap head screws
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-Also recommended for Remington applications due to the shallow threading on the
Remington magazine tubes
-No rails

Lancer magazine l5awm ar-15 5.56x45 5rd opaque black

FEATURES
-5.56x45mm / .223 Rem.
-Opaque Black
-5 round capacity
-Polymer body with aggressive surface texture
-One piece, wrap-around steel feed lip assembly

Designed to work in:
-M4/M16/AR
-SCAR16
-HK416
-ARX160
-SIG556
-ARC
-SA80

Other Features: Made in usa, fits m4/m16/ar15, hk416, arx160, scar 16, sig 556 etc, opaque-can't see through hardened steel feed lips with a polymer body

Lancer magazine l7awm sr-25 7.62x51 5rd opaque black

FEATURES
-Opaque Black
-5 round capacity
-Lightweight, strong polymer body
-Durable steel feedlips
-Switchable drain lock in floor plate allows users to configure the magazine for either
water-borne or extreme dust conditions

Designed to work in:
-SR25
-DPMS 308
-Sig 716
-LMT
-LM308
-POF P308
-S&W M&P10

Other Features: Made in usa, fits sr25, sig716, dpms 308, lm308, opaque-cannot see through hardened steel feed lips with a polymer body

Lancer handguard sig mpx 10" m-lok carbon fiber

FEATURES:
-Approximately 50% weight reduction vs OEM aluminum handguard
-1.6" ID allows for over-suppressor use
-M-LOK attachment system for greater compatibility w/ aftermarket accessories
-Same ease of installation as OEM handguard
-Extended versions clear most suppressors for improved ergonomics
-Weight: .25 lbs
-Length: 10"