Bravo Company Mfg.
![]()
FEATURES
-Foliage green
-Gunfighter Angled Grip
-Fits Picatinny rail version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers
FEATURES
-Mil-Spec Buffer Tube Kit
-W/ Buffer/Spring/Hardware
-Mil-Spec Receiver Extension (6 position)
-Receiver End Plate
-Lock Nut (Castle) M4
-Action Spring Carbine
-Buffer
Other Features: Mil-spec receiver extension (6 position), receiver end plate, lock nut (castle) m4, action spring carbine, buffer
FEATURES
-KMR Alpha
-13"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 7.8 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 13.4"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 10.2 oz on a very long 13" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Flat Dark Earth
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad
FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Black
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad
FEATURES
-Pistol Grip
-Mod 0
-Flat Dark Earth
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (User can decide which one to install)
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Pistol Grip
-Mod 0
-Black
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (User can decide which one to install)
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Flat Dark Earth
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Black
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
FEATURES
-KMR Alpha
-10"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 6.2 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 10.5"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 8.6 oz on a 10" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KeyMod Picatinny Aluminum Rail Section
-4"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
FEATURES
-Rail section is made of hard anodized aircraft aluminum alloy
-Made to the mil-standard 1913 picatinny arsenal specs
-Features a snag resistant design, while retaining Mil-standards
-M-Lok® compatible
-3"
FEATURES
-10" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide
Other Features: Aluminum alloy
FEATURES
-Fully ambidextrous
-Fits majority of popular 1" round body tactical light systems
-Design to mount on the 1:30 or 10:30 o'clock (upper 45° degree) rail positions
-Durable Aluminum construction
-Intently designed to be low-profile & snag-free
Other Features: Fits most 1" tactical lights
FEATURES
-Gunfighter Light Mount
-1"
-KeyMod Version
-Mod 0
-Black
-Fully Ambidextrous mounting; either the left or the right side of the rail system
-Fits majority of popular 1-inch round body tactical light systems
-Design to mount on the 1:30 or 10:30 o'clock (upper 45 degree) rail positions
-Strong Aluminum construction
-Intently designed to below-profile and snag-free
-Patent Pending anchoring system
-Minimal added weight, 1 oz
Other Features: Fits most 1" tactical lights
FEATURES
-Gunfighter Vertical Grip
-Picatinny
-Flat Dark Earth
-Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
-Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
-Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Reversible clamps allow user to setup fasteners to reside on either side
-Spring-loaded clamp makes installation and removal easier
-Made in the U.S.A.
FEATURES
-AR15 Enhanced Lower Parts Kit
-Flat Dark Earth
-This kit includes all the Mil-Spec quality components along with some fantastic upgrades including;
-BCM PNT Trigger Assembly
-BCM Pistol Grip, Mod 3
-BCM Enhanced Trigger Guard
-Made in the USA
FEATURES
-Pistol Grip
-Mod 3
-Flat Dark Earth
-Reduced angle for improved ergonomics and trigger control
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips
-Made in the USA and manufactured from high quality impact resistant polymers
-Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Pistol Grip
-Mod 3
-Foliage Green
-Reduced angle for improved ergonomics and trigger control
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips
-Made in the USA and manufactured from high quality impact resistant polymers
-Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a round carbine type handguard retaining cap
-Flat Dark Earth
Other Features: Polymer, drop-in, fits carbine length gas systems and mil-spec front sight base
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a triangle M16 type handguard retaining cap
-Black
Other Features: Polymer, drop-in, fits mid-length gas systems and mil-spec front sight base
FEATURES
-KMR Alpha
-7"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 4.5 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 7.39"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 6.9 oz on a 7" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KeyMod Picatinny Aluminum Rail Section
-5.5"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
FEATURES
-Black
-Gunfighter Angled Fore Grip
-Fits KeyMod rails
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers
FEATURES
-AR15 Enhanced Lower Parts Kit
-Black
-This kit includes all the Mil-Spec quality components along with some fantastic upgrades including;
-BCM PNT Trigger Assembly
-BCM Pistol Grip, Mod 3
-BCM Enhanced Trigger Guard
-Made in the USA
FEATURES
-Light Mount Modular
-KeyMod
-For Surefire Scout
-Fully Ambidextrous
-Low profile and sleek design
-Durable Aluminum
-Can be mounted flush or offset to the right or left
-Matte Black Finish
Other Features: For use with surefire's scout light mounting interface
Kit Includes:
-Extractor made to USGI specs (shot peened)
-Extractor pin
-BCM extractor spring (chrome silicon, heat treated & stress relieved, shot peened)
-3 USGI gas rings
-Crane Ind O-ring (Mil-Spec)
-Black extractor insert
Other Features: Extractor, extractor pin, extractor spring, usgi gas rings, o ring/extractor insert
FEATURES
-Gunfighter Vertical Grip Mod 3
-KeyMod
-Black
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Anchor and bolt system offersa simple robust design, while maintaining a lightweight 1.9 ounces.
-Flat sides give better yaw control to the shooter during firing and non-firing manipulations
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Mod 3
-KeyMod
-Flat Dark Earth
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Anchor and bolt system offersa simple robust design, while maintaining a lightweight 1.9 ounces.
-Flat sides give better yaw control to the shooter during firing and non-firing manipulations
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Made in the U.S.A.
FEATURES
-KMR Alpha
-15"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 8.6 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 15.0"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 11 oz on a very long 15" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KeyMod Picatinny Nylon Rail Section
-3"
-Black
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS