Magpul
![]()
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such asBushmaster, DPMS, Olympic, and others (please see the note below)
-Supplemental friction lock minimizes accuracy robbing wobble
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.55" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD & other receiver-mount sling attachments
-Sling Mounts
-Rear -Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec extension on your rifle, make sure to order #MAG310
Other Features: Fits commercial buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, and others (please see the note below)
-Supplemental friction lock minimizes accuracy robbing wobble
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD & other receiver-mount sling attachments
-Sling Mounts
-Rear -Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG311
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, and others (please see the note below)
-Supplemental friction lock minimizes accuracy robbing wobble
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD & other receiver-mount sling attachments
-Sling Mounts
-Rear -Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG311
Other Features: Fits mil-spec buffer tubes
FEATURES
-10 round capacity
-Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
-Commercial rifle compatibility includes the new Armalite AR-10A, Bushmaster .308 ORC, Colt LE901-16S,
CORE Rifle Systems CORE30, DPMS LR308, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les
Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, POF P-308, Remington R-25, Ruger SR-
762, S&W M&P10, SIG716, & others*
-True 10-round capacity that does not require limiters, pins, rivets, etc.
-Next-generation impact & crush resistant polymer construction
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-High-quality stainless steel spring for corrosion resistance
-Flared floorplate aids magazine handling & disassembly yet is slim enough for use with many pouches
-Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage
during storage and transit
*Note: NOT compatible with Armalite AR-10B, Noveske N6, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
FEATURES
-All steel construction
-Case hardened & finished with Melonite QPQ™ for extreme resistance to wear & corrosion
-Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
-Elevation adjustment knob – no tools required
-Positive detents in both the up & down positions as well as on the elevation knob
-Standard AR sight height when deployed
Elevation Adjustment:
1 MOA (1.131"/100m) per click with a 14.5" sight radius
0.7 MOA (0.820"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail & provides the same height-over-bore
as standard A2 irons
-Protective wings shield the dual, same plane flip apertures
-Sight can still be folded with either large or small aperture in position
-Detent knob easily & positively adjusts windage
Elevation Adjustment:
0.7 MOA (0.754"/100m) per click with a 14.5" sight radius
0.5 MOA (0.547"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail & provides the same height-over-bore
as standard A2 irons
-Protective wings shield the dual, same plane flip apertures
-Sight can still be folded with either large or small aperture in position
-Detent knob easily & positively adjusts windage
Elevation Adjustment:
0.7 MOA (0.754"/100m) per click with a 14.5" sight radius
0.5 MOA (0.547"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* & provides the
same height-over-bore as standard A2 irons
-Protective wings shield the spring-locking A2 front sight post
-Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be
used as well
Elevation Adjustment:
1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
1.2 MOA (1.367"/100m) per click with a 20" sight radius
*Note: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.Handguard height
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* & provides the
same height-over-bore as standard A2 irons
-Protective wings shield the spring-locking A2 front sight post
-Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be
used as well
Elevation Adjustment:
1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
1.2 MOA (1.367"/100m) per click with a 20" sight radius
*Note: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.Handguard height
FEATURES
-5 pack
-5.56x45 (.223 Remington)
-Made from proprietary hard polymer
Other Features: 10rd magazine in a 30rd body
FEATURES
-Drop-in replacement for the aluminum USGI 30-round magazine black or green follower
-4-way tilt design for increased feeding reliability
-Made from a non-hygroscopic & self-lubricating polymer
Note: Will not fit the latest generation USGI spring that is utilized with a tan follower.Also not optimized for thin-walled steel-bodied magazines.
Other Features: Fits most spec usgi aluminum magazines.Self-leveling design is a big improvement over the usgi follower.
FEATURES:
Fits: CZ Scorpion
Rugged polymer construction
Ergonomic design
TSP texturing for positve weapon control
FEATURES
-Very low-profile 1913 Picatinny rail coverage
-Made of Santoprene material, a rubbery surface whichoffers improved weapon control & rail protection
-Easily cut for custom lengths
-Each panel fits one side of a carbine-length rail (18 slots)
-One panel per package
Other Features: Fits picatinny rails, one per package
FEATURES
-Low-profile 1913 Picatinny rail coverage
-Easily cut for custom lengths
-The semi-rubbery material offers improved weapon control & rail protection
-Sections can mount next to each other to form a visually continuous cover
-Each panel fits one side of a carbine-length rail
-One panel per package
Other Features: Fits picatinny rails, one per package
FEATURES
-3 pack
-For 7.62 NATO
-Provides improved speed & controllability during high stress, tactical magazine changes
-Durable synthetic rubber loop with recessed rough gripping surface
-Quick & easy installation & removal
Other Features: Fits most ar-10 & sr25 magazines
FEATURES
-3 pack
-For 5.56 NATO
-Provides improved speed & controllability during high stress, tactical magazine changes
-Durable synthetic rubber loop with recessed rough gripping surface
-Quick & easy installation & removal
Other Features: Fits most ar-15 magazines