Magpul
![]()
FEATURES
-Replaces standard M4 Carbine-type plastic hand guards
-Compatible with most piston-driven as well as 'direct impingement' gas systems
-Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
-M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other
direct-attach M-LOK accessories
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip and side extensions, shields hand from hot gas block
-Relieved area at the top rear accommodates many overhanging optic mounts
Note: The MOE M-LOK Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards and utilizes the existing front hand guard retaining cap and delta ring.
Other Features: Fits ar15 w/carbine length gas system
FEATURES
-Replaces standard M4 Carbine-type plastic hand guards
-Compatible with most piston-driven as well as 'direct impingement' gas systems
-Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
-M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other
direct-attach M-LOK accessories
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip and side extensions, shields hand from hot gas block
-Relieved area at the top rear accommodates many overhanging optic mounts
Note: The MOE M-LOK Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards and utilizes the existing front hand guard retaining cap and delta ring.
Other Features: Fits ar15 w/carbine length gas system
FEATURES:
-Enhanced polymer drop in replacement for the AR-15/M4 weapons platform
-Features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations
-Non-folding
-Fills the "gap" at the rear of the standard trigger guard
-Also works well with most 7.62x51 AR platforms, but some custom fitting may be required
-All mounting hardware included
FEATURES:
-Enhanced polymer drop in replacement for the AR-15/M4 weapons platform
-Features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations
-Non-folding
-Fills the "gap" at the rear of the standard trigger guard
-Also works well with most 7.62x51 AR platforms, but some custom fitting may be required
-All mounting hardware included
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 3" recommended)
-Shorter in overall length & width compared to the original AFG
-All mounting hardware included
-Height, over rail: 1.94"
-Width, maximum: 1.37"
Other Features: Fits 1913 picatinny rails slim line design of the afg
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 3" recommended)
-Shorter in overall length & width compared to the original AFG
-All mounting hardware included
-Height, over rail: 1.94"
-Width, maximum: 1.37"
Other Features: Fits 1913 picatinny rails slim line design of the afg
FEATURES
-Designed for use with MOE hand guards & forends
-Attaches directly to these hand guards without any rail needed
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-All mounting hardware included
Other Features: Fits magpul moe hand guards and forends only
FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards
Other Features: Fits 1913 picatinny rails
FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards
Other Features: Fits 1913 picatinny rails
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 4" recommended)
-All mounting hardware included
-Height, over rail: 1.75"
-Width, maximum: 1.77"
Other Features: Fits 1913 picatinny rails
FEATURES
-Size L5 (11 Slots)
-Max overall length of 4.9"
-Mounting screw center-to-center of 3.2"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications
Other Features: Fits magpul moe handguards only
FEATURES
-Size L4 (9 Slots)
-Max overall length of 4.1"
-Mounting screw center-to-center of 2.4"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications
Other Features: Fits magpul moe handguards only
FEATURES
-Size L3 (7 Slots)
-Max overall length of 3.3"
-Mounting screw center-to-center of 1.6"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications
Other Features: Fits magpul moe handguards only
FEATURES
-Size L2 (5 Slots)
-Max overall length of 2.5"
-Mounting screw center-to-center of 1.2"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications
Other Features: Fits magpul moe handguards only
FEATURES
-Mounts to rifle-length receiver extension tube without A2 spacer (not included)
-Sloping cheek weld combines a slim profile with user comfort
-Overall shape provides for offhand hold options
-Rubber butt-pad provides positive shoulder purchase to prevent slippage
-Large storage compartment easily accessible behind hinged butt-plate
-Knockout bosses on the bottom allow for the addition of an optional accessory rail
-Sling Mounts
-Bottom Rear -1.25" sling loop
-Front/Rear -Optional Sling Mounts fit up to 1.5" push-button QD swivels
Note: The MOE Rifle Stock is a direct replacement for an A1 or A2 fixed stock. Fitting to a carbine with a collapsible stock will require a rifle-length receiver extension tube, rifle buffer & spring (not included).
*Specifications based on factory configuration
Other Features: Direct replacement for fixed a1 or a2 buttstock.
FEATURES
-Mounts to rifle-length receiver extension tube without A2 spacer (not included)
-Sloping cheek weld combines a slim profile with user comfort
-Overall shape provides for offhand hold options
-Rubber butt-pad provides positive shoulder purchase to prevent slippage
-Large storage compartment easily accessible behind hinged butt-plate
-Knockout bosses on the bottom allow for the addition of an optional accessory rail
-Sling Mounts
-Bottom Rear -1.25" sling loop
-Front/Rear -Optional Sling Mounts fit up to 1.5" push-button QD swivels
Note: The MOE Rifle Stock is a direct replacement for an A1 or A2 fixed stock. Fitting to a carbine with a collapsible stock will require a rifle-length receiver extension tube, rifle buffer & spring (not included).
*Specifications based on factory configuration
Other Features: Direct replacement for fixed a1 or a2 buttstock.
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such asBushmaster, DPMS, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.55" ExtendedRubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec size extension on your rifle, make sure to order #MAG400
Other Features: Fits commercial buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG401
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG401
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG379
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits mil-spec buffer tubes lightweight model
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such as Bushmaster, DPMS, Olympic, and others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to three (3) CR123A lithium or two AA batteries
-Tubes are accessible from the rear via a tethered, hand-removable rubber plug
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG370
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec receiver extension & may vary depending on tube manufacturer.
Other Features: Fits commercial buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to three (3) CR123A lithium or two AA batteries
-Tubes are accessible from the rear via a tethered, hand-removable rubber plug
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG371
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to three (3) CR123A lithium or two AA batteries
-Tubes are accessible from the rear via a tethered, hand-removable rubber plug
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG371
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such asBushmaster, DPMS, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec size extension on your rifle, make sure to order #MAG347
Other Features: Fits commercial buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348
Other Features: Fits mil-spec buffer tubes
FEATURES:
-Provides a forward attachment point for the Magpul MS4 Sling & other push-button QD slings
-Made from corrosion resistant steel
-Mounts on 1913 Picatinny rail
-Places the attachment point at an angle optimized for comfortable two-point sling use while maintaining
easy push-button access
Other Features: Qd sling swivel not included, qd attachment point only.
FEATURES:
-Can be added to either side of the SGA®, MOE® Rifle, MOE® Fixed Carbine,MOE® AK, Zhukov-S,
Hunter 700, and Hunter X-22 Stocks for use with push-button QD Sling Swivels or our own Magpul® QDM
-Heavy-duty black phosphatized steel construction
-Easily installs with provided hardware
-Swivels not included
Other Features: Allows qd swivel (not incl.) to be attached to sga shotgun stocks and moe rifle stocks (not carbine), and moe fixed carbine stocks.